Thank you for choosing 
the Centralite Indoor Entry Sensor with rechargeable battery

Welcome to the quick start guide for pairing your Centralite Indoor Entry Sensor with rechargeable battery with the MiOS mobile app. Follow these steps to ensure a smooth setup process.

You’ve taken the first step toward making your home smarter and safer.

We want setting up to be as easy as possible but if you’re finding yourself in need of help, our outstanding human customer care is for you through the following channels:

Toll-free number 866 966 2272
International number 702 487 9770
support@ezlo.com
support.ezlo.com

Our Customer Care team is available seven days a week between 6AM and 10PM CST/EST.

Product Description

The Centralite Indoor Entry Sensor detects the opening and closing of the doors and windows and works in conjunction with other devices and smart home hubs which enables smart home automation and app alerts. Ensure the door magnet is located on the side of the alignment mark.

Product Specifications

Requirements

The Centralite Indoor Entry Sensor with rechargeable battery needs to be paired with a ZigBee-compatible Smart home hub. The sensor is compatible with most of the ZigBee-compatible hubs in the market. The pairing process will be different when paired with another ZigBee smart home hub other than the Ezlo hubs.

Please refer to your specific hub manufacturer for the specific hub pairing instructions of Zigbee devices.

What You'll Need:
• Centralite Indoor Entry Sensor with rechargeable battery
• MiOS mobile app (available on iOS App Store or Android Play Store)
• Smartphone or tablet
• ZigBee-compatible smart home hub

Pairing with third-party Zigbee compatible hubs
Note: First, check the manual of the specific third party compatible hub to see how to include Zigbee devices. Then put the Zigbee hub in including Mode and continue with Step 5 from this guide.

Pairing the Centralite Indoor Entry Sensor with the MiOS app

Step 1: Pair with MiOS

• Ensure your mobile device has Wi-Fi enabled and is connected to your local network.
• Open the MiOS app and log in if you haven’t already.

Step 2: Add a New Device

• Tap on “More” then navigate to the “Devices” section in the app.
• Tap on the “+” icon to add a new device.
• Select your “active hub” from the list of Controllers.

Step 3: Find the device

• Use the search box and look for CLZ-3371.

Step 4: Prepare the sensor

• Slide the bracket down from the back of the sensor to reveal the On/Off switch and Reset button. Toggle the switch to the On position to power the sensor.

Step 5: Pair the sensor

• Press and hold the sensor's reset button for five seconds to pair it with your controller. The LED will blink red rapidly, indicating the sensor is in pairing mode.

Optional: If the sensor isn't detected in the next 60 seconds, click the ‘Retry’ button and begin the reset process.

Step 6: Confirm Pairing

• Wait for the MiOS app to detect the sensor.
• Once detected, confirm the pairing by following any additional prompts.

Step 7: Name and Place the Sensor

• Once paired, you can name your sensor and assign it to a specific room within the app.
• Remove the adhesive protective film from the back of the sensor and the contact magnet and place it on your door or window.
• Stick the sensor onto the door or window frame.
• Align the contact magnet with the sensor and stick the contact magnet onto the door panel or window frame at no more than ½ inch away from the sensor.

Step 8: Verify Sensor Functionality

Test the Sensor:
• Open and close the door or window where the sensor is installed.
• Check the MiOS app to see if it correctly registers the sensor’s status (open/closed).

Congratulations! Your Centralite Indoor Entry Sensor is now paired with the MiOS app and ready for use. Enjoy enhanced security and monitoring for your home.

Are you having difficulties setting up your Centralite Indoor Entry Sensor? Our customer care is here to help: 866 966 2272, support@ezlo.com.

200 Broadacres Dr, Bloomfield, NJ 07003 866-966-2272 • ezlo.com or support@ezlo.com