Ezlo PlugHub Energy LED Behavior

Sara
Sara
  • Updated
Reset button action
Result action
LED Indication
Z-Wave action
       
Connect the Ezlo PlugHub to the power supply with the button pressed down Test mode 3 blinks per second  
One short (0.2 - 2,5 seconds) pressing
  • Change the plug state (On→ Off / Off→ On)
  • Send the broadcast message to NMA server
1 blink Broadcast HAIL message
One long (5 - 9.5 seconds) pressing Reset to default options of a local WiFi connection of an PlugHub32 hub
  • 3 blinks per second, stop when reset process will be finished
  • Once finished - 1 blink per second, until PlugHub will be connected to Wi-Fi
 
One long (more than 10 seconds) pressing Soft reset (remove all devices, reset settings, hub remains connected to Wi-Fi LAN)
  • 10 blinks per second, stop when reset process will be finished
  • Start blinking after 5th second of button pressed
 
One long (more than 20 seconds) pressing Factory reset
  • LED is On, turn Off when reset process will be finished
  • Turn On LED after 10th second of button pressed

 

Was this article helpful?

0 out of 1 found this helpful

Have more questions? Submit a request

Comments

0 comments

Please sign in to leave a comment.